Duplex PC UPC APC LC Fiber Optic Adaptor With Low Insert Loss
Both ends of the fiber optic adapter can be inserted into fiber
optic connectors of different interface types to realize the
conversion between different interfaces such as FC, SC, ST, LC,
MTRJ, MPO, etc. It is widely used in optical fiber distribution
frames (ODF), optical fiber communication equipment, Instruments,
etc., superior performance, stable and reliable.
feature:
The optical fibers are connected by the adapter through the
internal opening sleeve to ensure the highest connection
performance between the optical fiber connectors. In order to be
fixed on various panels, a variety of fine fixing flanges are also
designed.
The two ends of the conversion adapter can be connected to optical
fiber connectors of different interface types, and provide the
connection
The optical fiber connector is a device for detachable (movable)
connection between an optical fiber and an optical fiber. It
precisely connects the two end faces of the optical fiber so that
the light energy output by the transmitting fiber can be coupled to
the receiving fiber to the maximum extent. And to minimize the
impact on the system due to its intervention in the optical link,
which is the basic requirement of optical fiber connectors. To a
certain extent, the optical fiber connector also affects the
reliability and performance of the optical transmission system.
Optical fiber connectors can be divided into common silicon-based
optical fiber single-mode and multi-mode connectors according to
different transmission media, as well as other optical fiber
connectors such as plastics as transmission media; according to the
structure of the connector, it can be divided into: FC , SC, ST,
LC, D4, DIN, MU, MT, etc. various forms. Among them, ST connectors
are usually used for wiring equipment, such as optical fiber
distribution frames, optical modules, etc.; and SC and MT
connectors are usually used for network equipment. According to the
shape of the fiber end face, it is divided into FC, PC (including
SPC or UPC) and APC; according to the number of fiber cores, there
are also single-core and multi-core (such as MT-RJ). Optical fiber
connectors are widely used and have many varieties. In the actual
application process, they are generally distinguished according to
the structure of the optical fiber connector. The following are
some of the more common fiber optic connectors:
Application:
Local area networks (LANs)
Data processing networks
Telecommunication networks
Test equipment
Patch panel, optical fiber optic distribution frame
Specification:
| Item | Parameter |
| Material | ABS, PBT, PC |
| Color | Blue,Green,Grey,Aqua,Purple etc. |
| Scope | PC&APC |
| Insertion Loss | <0.2dB |
| Operation Time | 500 times without distortion and crack, Variety Insertion
Loss<0.1dB |
| Insertion Loss | -40 ~ +85°C |
| Mechanical Durability | 50N, connection with two connectors, connection time of 30min |
| Temperature | 40N, connection with two connectors, connection time of 30min |
| Axial Tension Force | >8 N |
| Side Shear Force | -40~+75°C |
Environment and Mechanical:
| Properties | Test condition | Conformance | Test result |
| Vibration | 10-55Hz, 1.5mm, 60min | IEC61300-2-1 | ≤0.2dB |
| Mating Durability | 1000 Mating, clean every 25 mating. | IEC61300-2-2 | ≤0.2dB |
| Impact | 1.5m, 8 drops | IEC61300-2-6 | ≤0.2dB |
| Strength of Coupling Mechanism | 40N, 10Min, L=22-28cm | IEC61300-2-12 | ≤0.2dB |
| Temperature Cycling | 40ºC to +75ºC, 40 cycles | IEC61300-2-22 | ≤0.2dB |
| Temperature humidty cycling | 40ºC, 95%, 96Hr | IEC61300-2-21 | ≤0.2dB |
| Operating Temperature | -40ºC to +85ºC | | ≤0.2dB |
| Storage Temperature | -40ºC to +85ºC | | ≤0.2dB |
Order Information:
SC/APC-SC/APC-SM-DX-ABS
1. Connector Type: FC, SC, LC, ST, MPO, MTRJ, MU, D4, DIN, SMA
2. Ferrule End-face: PC, UPC, APC
3. Core Type : SM, MM(OM1 OM2 OM3 OM4)
4. Structure: Simpled, Duplex, Quad
5. With flange, without flange
6. Sleeve: copper alloy,Zinc alloy
7. Material: ABS, PC, PBT
